Acoustic Slatted Wall Panel 2400mm x 600mm - Walnut x 1 panel

Very good but over ordered and have 1 panel left, all be handy if you half width end strips. But overall easy enough to fit as long as you lay out first before final fix.

Were do i start. From start to finish of my order has been a total pleasure. Living in Northern Ireland your always wary of product quality and delivery of items. However on this occassion i give both 10/10 !!!. The Quality of panels are Amazing and after a joiner fitted with wall screws only,i couldn't be Happier. The info i got on delivery status was exceptional,with great packaging and a call from Driver just before arrival. Money well spent.
BIG THANK YOU TO YOUR TEAM
Kind regards
Billy.

Very quick delivery and panels are very good quality...I ordered 6 panels received 2 in each pack...although 2 panels were damaged both from separate packs but luckily I managed to cut the damaged pieces off luckily panels needed cutting down apart from that I was very happy

Brilliant customer service and quality!

The whole process from ordering to delivery was seamless, communication was good and delivered on the agreed time. The panels had quality and were easy to cut and fit, I would not hesitate to recommend these products or the company.😁

(I am also including an end trim within this review, along with how I did it and photos of it all, a bit long winded but I'm old.)
Great at the price, look and feel like all the others out there - just more affordable.
These are easy enough to install with simple tools, they can be cut with a fine toothed hand saw and the felt can be cut with a sharp bladed knife and a straight edge / metal ruler. Just take your time and double check your measurements.
Pay attention to the spacing and orientation of the panels, depending on where they are actually going, also give a little thought as to where the staples are on the reverse side so that you do not end up with one end of the slats sort of hanging loose - where mine went across the top of the door, was less than 8 inches but by trimming both the top and the bottom of the panel my slats maintained 2 staples each slat, had I gone in blind they would have only had one staple per slat, yes two extra cuts but nothing in the great scheme of things.
When installing you really want to be avoiding having to cut along the length of a slat, that is where layout is worth some thought.
I commenced mine with the slat butt up to the architrave, then trimmed the backing felt accordingly. If that piece of backing felt needs to be wider then a slat can be removed by snipping the staples at the rear (but keep that as a spare) I then trimmed the felt so that it fitted neatly into the internal corner. Next I worked out how the next panel was to fit, it suited me to use the spare slat and stuck it along the edge using two-part mitre adhesive (one edge like a superglue, the other a activating spray, then on the inside of that I ran a bead of no-nails adhesive and covered that with a strip pf black ducting tape so I could carry on attaching it all, using a neatly trimmed length of backing felt behind it to continue the spacing as if attached. Although I had and edging trim strip it just didn't work with the width of the panel and as my walnut veneer is quite dark it looks OK.
Finally for the righthanded end I used the edging trim that fitted over the tongue edge of the felt, again I ran a bead of no-nails into the rebate of the edging trim, then fixed the trim at three places using a small piece of thin banding bracket - make sure you only use short, small screws and drill a small pilot hole as MDF is a bit odd that way. Again I taped along the back with black ducting tape.
For attaching to the wall I used black phosphate plasterboard screws through the backing felt between the slats, you cannot see them once in place and it means that the panels can be removed for decorating at a later date. I know people attach them with no-nails (and screws as well!!!) but these panels are not heavy and only need fixing in columns of three screws - left side, right side and middle, repeated in four or five rows.
Top tip if you're creating a media wall you can attach slim half inch / 13mm battens to the wall, then fix the panels to that, thereby creating a gap for the cables, depending on your layout. Add to that If attaching a TV wall bracket that is best being fitted to a board as opposed to if pulling the felt panelling into the wall.
To get a really professional finish look online for switch and socket surrounds, they are purpose made and with the right choice of fittings, IMO, certainly look the part.
I note some reviews question the quality, wrong colours, delivery problems etc. - I was close enough to order and collect, bought three panels, one panel was out of the box but fully wrapped in cellophane, the other pair were also in cardboard with a clever pop-out window so you can check the colour - nothing to complain about from me.

Bought sets of three different colour wood panel's, one came with minor damage on the end but otherwise great panels, great quality, great price & Fast delivery (came next day) Will be buying from here again for sure!

Great product looks great and easy to install!

Great quality great price beautiful colour walnut!
Easy to fit! Would 100% recommend

Great product, good price and the delivery guy was a top guy

Fantastic. Would highly recommend

Great quality and price! Easy to install! Definitely recommend

Fan quality

Absolute fantastic company! Made my order and received a call the next day advising how delivery would be completed, how driver would contact me when delivering, time etc.. I live in Northern Ireland so a little bit more complicate delivery process as you can imagine bit great turnaround, delivered within a week. Highly highly recommended.

These panels are amazing. So cheap too. Will be back for more. See my work in progress pic :)

It’s not finished yet but it looks great. Very please all round

I was told about these panels by a friend at work who had bought them & said he would recommend them.
To be honest, at the price I paid I wasnt sure what to expect.
I can now say after installing them in my daughters bedroom that they are an excellent quality panel with a good thick felt backing, she is absolutely over the moon with the look.
I also had to get in touch with customer services a couple of times as I had messed up my order, this was done by email, the replies were fast, & they couldn't have been more helpful.
I would have no hesitation in recommending this company or their products as I have had nothing short of a great experience dealing with them.
Panel Hub get 5 stars all round from me!

Covered my bar with it and the finish is mint

I couldnt be happier with these acoustic panels. Absolutely top quality. Way better than what id previously looked at. Couldn't recommend this company and those panels more. If you looking for quality and affordability and a company that keeps you in the loop every step of the way, Look no further.